….transmitters never have a minimum power, only a maximum.
I haven't reviewed the 802 standard recently, but iirc it does allow for lowering power for base stations...
Bingo. Reducing the base station power sounds right.
I went back to the Airport Utility and, under Network, found Network Options.
There is DCHP Lease with a box that has a 4 in it, followed by Hours.
Then there is IPv4 Range with a pulldown menu that has 3 options. 10.0, 172.16, 192.168
It is followed by 2 boxes that have a decimal point in front. The numbers in the boxes are 1 and 2.
Following the second of these boxes is the word "to" and a third box that has 200 in it.
Below, there is a check box to "Enable NAT Port Mapping Protocol." It is checked.
A second check box (not checked) says "Enable default host at:" followed by a box with nothing in it.
Am I in the right neighbourhood for increasing output?